ACU-RITE 200S READOUTS Manual do Utilizador descarregar pdf (Página 39)

200S 25

I - 3 Milling Specific Operations

Entering a tool:

8 Press the TOOL. soft key. The cursor will default to the Tool Table

form.

8 Cursor to the tool you want to define or enter the tool number. Press

ENTER.

8 Enter the tool diameter, for example (2).

8 Press the DOWN ARROW key.

8 Enter the tool length, for example, (20).

8 Press the DOWN ARROW key.

-ALTERNATIVE METHOD -

It is also possible to have 200S determine an offset. This method

involves touching the tip of each tool to a common reference surface.

This allows 200S to determine the difference between the length of

each tool.

8 Move the tool until its tip is touching the reference surface.

8 Press the TEACH LENGTH soft key. 200S will calculate an offset

relative to this surface.

8 Repeat the procedure for each additional tool using the same

reference surface.

8 Press ENTER.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 97 98

Sem comentários

ACU-RITE 200S READOUTS Manual do Utilizador Página 39